PC-Concrete - for anchoring and filling

PC-Concrete™

PC-Concrete™ Anchoring and Crack Filling Epoxy is the epoxy chosen to repair cracks in warehouse and factory floors.

PC-Marine - for underwater repairs

PC-Marine™

PC-Marine™ Epoxy Putty Stick is a specially formulated epoxy putty suitable for wet or underwater applications. For a fast return to service and emergency repairs.

PC-Metal - for replacing metal

PC-Metal™

PC-Metal™ Putty Epoxy replaces metal. Cures hard, fast, nonconductive. Contains metal – sticks to metals such as cast iron, zinc, aluminium, stainless steel, steel and copper.

Tite Chairs - to eliminate squeaks

Wonderlok’em® Tite Chairs®

Loose wooden joints that wobble, squeak or loosen over time? Tite Chairs® quickly fixes those wooden joint problems. Just apply a few drops of Tite Chairs® into the loose joint.

PC-Woody - for filling cavities

PC-Woody®

PC-Woody® is a two part epoxy paste that is excellent for filling cavities in wood. Make permanent repairs without shrinking, cracking or popping out of exterior wood.

PC-Petrifier - for repairing soft wood

PC-Petrifier®

PC-Petrifier® Rotted Wood Hardener repairs wood damaged by insects or rot. It is a liquid that is brushed, sprayed or injected into the pores of the wood. No mixing.

PC-Rot Terminator - for structural damage

PC-Rot Terminator®

PC-Rot Terminator® Epoxy Rotted Wood Hardener is for wood that has structural damage caused by insects or rot. A mixture of resin and hardener that cures hard.

PC-Plumbing - for stopping leaks

PC-Plumbing™

PC-Plumbing™ Epoxy Putty is for pipes, stopping leaks in less than 60 minutes. NSF® approved for plumbing repairs and for contact with potable water supply pipes.

PC-Fahrenheit - for high temp repairs

PC-Fahrenheit™

PC-Fahrenheit™ Putty Epoxy is the choice for temperatures up to 260° C/500° F. Best for steam heat applications. A toolbox must. Great on copper and iron.

PC-Clear - for invisible repairs

PC-Clear™ Epoxy

PC-Clear™ is a clear liquid epoxy with strength rivalling that of heavy duty paste epoxies. It has flexibility, is shatter resistant and a one hour cure time.

PC-7 - for tough jobs

PC-7® Paste Epoxy

PC-7® is the original tough job epoxy! Designed for permanent repairs, professionals to the do-it-yourselfers select PC-7® because of its exceptional adhesion.

PC-11 - for underwater repairs

PC-11® Paste Epoxy

PC-11® thrives in wet environments. It is resistant to water whether it is fresh or salt. Work horizontal or vertical, indoor or outdoor. Wet, dry or under water.

PC-Super Epoxy - for high strength adhesion

PC-SuperEpoxy®

PC-SuperEpoxy® is a non-drip translucent paste epoxy suitable for conventional or static mixing with unlimited uses in bonding, assembling, filling and sealing.

PC-Auto Bond - for cold welding

PC-AutoBond™ Epoxy

PC-AutoBond™ is a fast curing, strong and flexible cold weld Epoxy formulation. It is an extremely flexible epoxy with exceptional tensile adhesion.